Setup Tablet with AutoCad 14 in Windows 95/NT

A.  Before setup

    1.  Prior to using these instructions, the Digitizer should be working on the desktop in Windows 95/NT.

B.  Setting up the tablet 

    1.  Pick  the "TOOLS" pull-down,

        Choose "PREFERENCES"
        or
        Type 'Config' at the Command line'.

   2.  Pick the "POINTER" tab,

   3.  Choose:  "WINTAB COMPATIBLE DIGITIZER BY AUTODESK"

   4.  After highlighting the correct driver you must hit the "SET CURRENT" button.

   5.  In this same dialog box, in the area titled: 'Accept input from:' 

   6.  Choose:  "DIGITIZER AND MOUSE"

   7.  Choose:  "OK"

   8.  You now have AutoCAD 14 Windows Configured for the Digitizer.   You can now use the Tablet Command to set-up
       (CFG) the AutoCAD template or Calibrate the board.